Three Bond 1386D - Anaerobe Klebedichtung - Großspalt-Typ - 1,8 kg Flasche
Three Bond 1386D – Anaerobic gasket sealant A20085 in the large-gap type
The anaerobic adhesive Three Bond 1386D belongs to the category Anaerobic adhesives and enables a film-sealing in large-gap joints up to 0.3 mm. Made from Methacrylate, it provides rapid strength development and can be applied over large areas, also in regions with oil or coolant.
The red paste cures reliably and offers high resistance to oil, coolants and temperature cycles. The operating temperatures range from -50 °C to 150 °C, and the optimal gap tolerance is 0.02 mm.
Storage life is 9 months; the functional strength typically 4–6 h after curing. The seal can be film-applied, enabling consistent sealing of gaps.
Suitable for oil, coolant & temperature cycles
Large-gap joints
Due to the film-forming nature and resistance to oil and coolant, the product is suitable for seals in large-gap joints up to approx. 0.3 mm gap width. This property reduces leakage paths even under dynamic loads and temperature changes.
Dimensions and specifications
- Main component: Methacrylate
- Color: Red
- Viscosity 25 °C: 1.5–2.5 Pa·s
- Density 25 °C: 1.10 g/cm³
- Temperature range: -50 to 150 °C
- Storage life: 9 months
- Functional strength: 4–6 h
- Optimal gap tolerance: 0.02 mm
Special features
- Film-forming application enables uniform seals over larger surfaces
- Stable against oil, coolants and cyclic temperature changes
- Low gap tolerance enables precise gap management
Product Properties
| Hauptkomponente | Methacrylat |
|---|---|
| Farbe | rot |
| Optimale Fugentoleranz (mm) | 0,02 |
| Lagerfähigkeit (Monate) | 9 |
Related products
