Three Bond 1747 - Cyanacrylat-Gel (thixotrop) - 20 g Flasche

Three Bond 1747 Cyanacrylate Gel (thixotropic) – 20 g (A20121) Overview

The Three Bond 1747 Cyanacrylate Gel is a thixotropic gel adhesive system that reduces dripping and enables a controlled application. As part of the cyanoacrylate family, it offers fast curing at moderate temperatures and good adhesion to various materials. The gel consistency ensures that the adhesive does not slump on vertical surfaces.

The color is colorless, which facilitates invisible adhesive bonds, especially with transparent or light optics. The main component is Ethyl-Cyanoacrylate, which provides strong, fast bonding. When used on metals and elastomers, it achieves high shear strength and good impact resistance.

Key technical properties: Viscosity (25 °C): approx. 2,000 mPa·s, Density (25 °C): approx. 1.05 g/cm³, Curing time: approx. 10 s, Shear strength: approx. 16 MPa and Impact strength: approx. 14 kJ/m². The product is suitable for temperatures from -40 °C to 85 °C and can be stored for up to 9 months (unopened). These properties make it especially suitable for fast, robust adhesive joints in electronics, precision engineering and industrial components where drip-free performance and contour fidelity are required.

Suitable for Metal and Elastomer Bonding

On metals, the gel provides robust adhesion, while elastomeric materials, due to the good adhesion and elasticity, enable a durable joint. The thixotropic consistency minimizes displacement and allows precise positioning before curing.

Technical data of the Three Bond 1747 Gel

• Main component: Ethyl-Cyanacrylate
• Color: Colorless
• Viscosity (25 °C): approx. 2,000 mPa·s
• Density (25 °C): approx. 1.05 g/cm³
• Temperature range: -40 °C to 85 °C
• Shelf life: approx. 9 months
• Shear strength: approx. 16 MPa
• Impact strength: approx. 14 kJ/m²
• Curing time: approx. 10 s

Composition and Application Characteristics

This gel is based on Ethyl Cyanoacrylate and is formulated as a thixotropic gel, reducing dripping and enabling a precise application. The clear, colorless optics facilitate adhesive bonds on visible components. The rapid curing enables short process times after assembly.

Processing Tips & Practice

• Thoroughly clean and degrease surfaces.
• Apply adhesive in a thin layer, control positioning.
• Join components and hold in place – curing approx. 10 s.
• If needed, continue post-processing or curing under load.