Three Bond 1782 - Cyanacrylat-hochfest - 50 g Flasche

Three Bond 1782 – Cyanoacrylate-high-strength (A20127)<\/h2>

The Three Bond 1782<\/strong> is a cyanoacrylate<\/em> adhesive in a 50 g bottle<\/strong>. The main component is Ethyl cyanoacrylate<\/em>, which enables rapid curing when required.<\/p>

Suitable for metal, plastics and rubber<\/h2>

Metal<\/h3>

On metal surfaces, the adhesive achieves a fast, strong bond that is well suited for thin sheets, screw connections or bonded contact surfaces. The bonded surfaces should be clean, dry and free of oil.<\/p>

Plastics & Rubber<\/h3>

For rubber- or plastic-based materials, the adhesive offers good adhesion on many plastic types. For optimal hold, a brief surface pre-cleaning of the bond area and an even distribution of the adhesive are recommended.<\/p>

Technical data of Three Bond 1782<\/h2>

• Adhesive type:<\/strong> Ethyl cyanoacrylate<\/li>
• Color:<\/strong> Colorless<\/li>
• Viscosity at 25 °C:<\/strong> ca. 80 mPa·s<\/li>
• Density at 25 °C:<\/strong> ca. 1.05 g/cm³<\/li>
• Temperature range:<\/strong> -40 °C to 120 °C<\/li>
• Shelf life:<\/strong> ca. 9 months<\/li>
• Curing time:<\/strong> ca. 10 s (under Fe reference)<\/li>
• Shear strength:<\/strong> ca. 25 MPa<\/li><\/ul>

  Properties and benefits<\/h2>

  The cyanoacrylate adhesive offers rapid bonding<\/strong> and robust strength that saves time in many applications. The colorlessness<\/em> enables invisible bonding joints, especially on shiny surfaces.<\/p>

  Practical tips: How to use Three Bond 1782<\/h2>

  • Clean surfaces and degrease; remove any adhering residues.<\/li>
  • Apply the adhesive in a thin, even layer.<\/li>
  • Align parts immediately; Curing time approx. 10 s<\/strong> – support fixation with a light load if necessary.<\/li>
  • After assembly, promptly remove excess adhesive before it cures.<\/li><\/ul>