Three Bond 1101 - Nichttrocknende Phenolharzdichtung - 200 g Dose

Three Bond 1101 – Non-drying phenol resin seal

The Three Bond 1101 is a non-drying phenol resin seal in a 200 g can. It belongs to the category sealant and is produced solvent-free, which simplifies maintenance and enables material-friendly application.

As a sticky sealant without solvents, it does not attack rubber or plastics and can be easily removed during maintenance.

Main component: Modified phenol resin. Non-curing: yes. Color: reddish-brown. Viscosity at 25 °C: 1000 Pa·s. Density at 25 °C: 1.42. Non-volatile solids: 99. Operating temperature range: -60 to 80 °C. Removability: Very good. Shelf life: 24 months.

Properties and their benefits

The properties of the seal combine tackiness, material compatibility, and ease of maintenance:

• Non-curing: Allows easy dismantling during maintenance.
• Material compatibility: Does not attack rubber or plastics – safe seals in components.
• Removability: Very good – minimizes downtime.
• Operating temperature range: -60 to 80 °C – suitable even under cycling loads.
• Shelf life: Up to 24 months in the original container.

Processing & Practical Use

1. Clean surfaces of dust, grease, and moisture.
2. Apply the seal evenly and avoid stresses.
3. During maintenance, remove mechanically and re-install if applicable.

Composition: Modified phenol resin

The sealant is based on modified phenol resin and is solvent-free. It does not attack rubber or plastics and remains easily removable during maintenance. The sealant features a reddish-brown color, which supports clear visual identification.